Repair Technician
Company Name:
Simco Electronics
SIMCO Electronics originated in the heart of Silicon Valley in 1962 and was built on a foundation of dedication to customer service and commitment to technical superiority. Today, SIMCO Electronics is headquartered in Santa Clara, CA with a worldwide network of laboratories and international field service teams providing localized support.
SIMCO Electronics' strategic emphasis is to provide enhanced program management systems and services for customers' test and measurement equipment needs. One global service provider improves quality control and compliance of services while reducing total program costs.
The principal markets served by SIMCO Electronics include Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, and Government. Specific market-focused expertise is the core of SIMCO Electronics' competencies and a central focus of capital investments and strategic initiatives.
The Repair Technician will apply knowledge of measurement science, mathematics, physics and electronics to perform calibration and repair of test measurement and diagnostic equipment used in the Life Science, RF/Telecommunications, and Semiconductor/Electronic Components markets. This position will normally receive general instructions on work assignments that are semi-routine in nature and where the ability to recognize and apply technical deviations from general troubleshooting and repair is required. The Repair Technician will identify and utilize appropriate manual and automated measurement procedures. The Repair Technician will perform laboratory and work area housekeeping.
Job Requirements
Responsibilities and Duties
Evaluate, test, troubleshoot, and repair systems to the component level of test measurement and diagnostic equipment.
Enter repair and calibration data into SIMCO Main Computer System (SMCS) database.
Prepare repair quotations and calibration reports and certificates related to assignments in a timely manner.
Perform calibrations and repair in one or more of the following skill areas, as applicable:
bio-med instrumentation
electronic standards
fiber optics
LCR and impedance
nuclear and radiation physics
oscilloscopes
particle counters
photo/radiometric optometry
ESD
RF/microwave power, frequency, and impedance
sound pressure level
spectrum and network analysis, time interval and frequency
vibration
video
voltage & current
waveform analysis, phase and distortion
Receive and complete training on repair and calibration procedures, documentation, and SMCS.
Assist in the training of other technicians on specialized skills.
Regular interaction with other technicians, CSRs, Account Managers, management, and customers.
Qualifications
1. Minimum AA degree in Electrical Technologies, formal PMEL, or equivalent.
2. Must be able to perform mathematical computations related to specification and measurement analysis.
3. Minimum four years of electronic repair and calibration education and experience.
4. Strong knowledge of electronic circuit theory and advance soldering skills.
5. Familiar with general calibration and repair laboratory work stations.
6. Must have great interpersonal and customer service skills.
7. Strong attention to details.
8. Must possess good written, oral, and documentation skills.
9. Must be a self motivator, work as a team player, and follow written procedures.
10. Working knowledge of MS Word and Excel.
Physical Demands
(Lifting, standing, bending, repetitive motion, etc. be as specific as possible)
Must be able to lift up to 45 pounds without assistance.
Occasional standing and bending are required.
Working Environment
(Office environment, laboratory, travel, etc.)
1. Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites.
Job Requirements:
Skills Required:
Field Service, Fixed Equipment, Instrument, Maintenance, Process/Process Control
Other Skills:
Evaluate, test, troubleshoot, and repair systems,TDME,DMN's,VNA'sEstimated Salary: $20 to $28 per hour based on qualifications.
Simco Electronics
SIMCO Electronics originated in the heart of Silicon Valley in 1962 and was built on a foundation of dedication to customer service and commitment to technical superiority. Today, SIMCO Electronics is headquartered in Santa Clara, CA with a worldwide network of laboratories and international field service teams providing localized support.
SIMCO Electronics' strategic emphasis is to provide enhanced program management systems and services for customers' test and measurement equipment needs. One global service provider improves quality control and compliance of services while reducing total program costs.
The principal markets served by SIMCO Electronics include Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, and Government. Specific market-focused expertise is the core of SIMCO Electronics' competencies and a central focus of capital investments and strategic initiatives.
The Repair Technician will apply knowledge of measurement science, mathematics, physics and electronics to perform calibration and repair of test measurement and diagnostic equipment used in the Life Science, RF/Telecommunications, and Semiconductor/Electronic Components markets. This position will normally receive general instructions on work assignments that are semi-routine in nature and where the ability to recognize and apply technical deviations from general troubleshooting and repair is required. The Repair Technician will identify and utilize appropriate manual and automated measurement procedures. The Repair Technician will perform laboratory and work area housekeeping.
Job Requirements
Responsibilities and Duties
Evaluate, test, troubleshoot, and repair systems to the component level of test measurement and diagnostic equipment.
Enter repair and calibration data into SIMCO Main Computer System (SMCS) database.
Prepare repair quotations and calibration reports and certificates related to assignments in a timely manner.
Perform calibrations and repair in one or more of the following skill areas, as applicable:
bio-med instrumentation
electronic standards
fiber optics
LCR and impedance
nuclear and radiation physics
oscilloscopes
particle counters
photo/radiometric optometry
ESD
RF/microwave power, frequency, and impedance
sound pressure level
spectrum and network analysis, time interval and frequency
vibration
video
voltage & current
waveform analysis, phase and distortion
Receive and complete training on repair and calibration procedures, documentation, and SMCS.
Assist in the training of other technicians on specialized skills.
Regular interaction with other technicians, CSRs, Account Managers, management, and customers.
Qualifications
1. Minimum AA degree in Electrical Technologies, formal PMEL, or equivalent.
2. Must be able to perform mathematical computations related to specification and measurement analysis.
3. Minimum four years of electronic repair and calibration education and experience.
4. Strong knowledge of electronic circuit theory and advance soldering skills.
5. Familiar with general calibration and repair laboratory work stations.
6. Must have great interpersonal and customer service skills.
7. Strong attention to details.
8. Must possess good written, oral, and documentation skills.
9. Must be a self motivator, work as a team player, and follow written procedures.
10. Working knowledge of MS Word and Excel.
Physical Demands
(Lifting, standing, bending, repetitive motion, etc. be as specific as possible)
Must be able to lift up to 45 pounds without assistance.
Occasional standing and bending are required.
Working Environment
(Office environment, laboratory, travel, etc.)
1. Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites.
Job Requirements:
Skills Required:
Field Service, Fixed Equipment, Instrument, Maintenance, Process/Process Control
Other Skills:
Evaluate, test, troubleshoot, and repair systems,TDME,DMN's,VNA'sEstimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
